Focusing on the production of rubber machinery and equipment

Provide high-quality products and comprehensive services

4-roll rubber calender production line

Provide high-quality rubber machines and comprehensive services

Large open mixing mill mixer machines

Supplied to Michelin Tire

Focusing on the manufacturing of rubber compounding &mixing plant machines since 1993

Provide high-quality equipment and comprehensive services

Focusing on the manufacturing of 4-roll rubber calender with complete calendering line since 1993

Provide high-quality equipment and comprehensive services

China biggest mixing mill XK-810x2540 made in our factory

For Michelin Tire

Company News

Industry News

Home page

Generally, what are the structural characteristics of 550 rubber open rubber refining machine?

The roller of 1.550 rubber open rubber mixer adopts vanadium-titanium alloy cold hard cast iron, with a hard and wear-resistant surface; The inner cavity is processed to make the roll surface temperature uniform.

2.550 rubber open rubber mixer is equipped with overload protection device, so that the main parts are not damaged due to overload.

3.550 rubber open rubber mixer is equipped with emergency braking, when an emergency occurs, pull the safety tie rod, the machine brakes immediately, safe and reliable.

The transmission system of 4.550 rubber open rubber mixer adopts hard tooth surface reducer, which has compact structure, low noise, high efficiency and long service life.

5.550 rubber open rubber mixer adopts integral base, easy to install.

Generally speaking, what kind of structural characteristics does the 550 rubber open rubber mixer have

Open mixer fittings

Two roll

Cold hard cast iron roller, suitable for rubber, plastic industry, equipped with spherical bearings, flexible and durable, power saving, reduce maintenance.

Generally speaking, the 550 rubber open rubber mixer is used for plastic mixing of rubber or plastic, as well as vulcanizing agent pressing and film output of rubber after mixing

Related information

What are the good ways when the refiner is mixed with glue?

Mixing with a mill is an early mixing method in the rubber industry. Compared with mixing with a mixer, the mixing of the open mill has high labor intensity, poor production efficiency, unsafe, polluted environment, etc., and the uniformity of mixing is poor, so it has tended to be gradually eliminated. However, the use of open mill mixing, greater flexibility, mixed rubber is suitable for small production scale, small rubber batch and many varieties of factories. For the production of some special rubber materials, such as sponge glue, hard glue, color glue, etc., it is particularly suitable for mixing with an open mill, so the current use of open mill mixing in small rubber factories still accounts for a certain proportion.

2023

04-14

The importance of the secret refining machine and the opening machine in plastic refining

Rubber is deformed by external forces, and the ability of rubber to maintain its deformation after the external force is eliminated is called plasticity. The process of increasing rubber plasticity is called plasticizing. Rubber has plasticity in order to be evenly mixed with various compounding agents during mixing; Easy to penetrate into the textile during calendering; It has good fluidity when pressing out and injecting. In addition, plastic refining can also make the properties of the rubber uniform, which is convenient to control the production process. However, excessive plastic refining will reduce the strength, elasticity, wear resistance and other properties of vulcanized rubber, so the plastic operation needs to be strictly controlled. Rubber plasticity is usually expressed in Williams' plasticity, Mooney viscosity, and Dever hardness.

2023

06-05

How can the craft process of rubber products be missing?

There are many kinds of rubber products, but the production process is basically the same. The basic process of rubber products using general solid rubber (raw rubber) as raw material includes: plasticization, mixing, calendering, extrusion, molding and vulcanization 6 basic processes.

2023

04-14

Knowledge of mixed refining machines

A section mixing method refers to the method of preparing mixed rubber after completing the addition of all compounds at one time, and is often used to prepare those rubber materials with good scorching performance and no or only a small amount of active compounds. In order to ensure that the temperature of the rubber in the mixing does not rise too fast, a period of low-speed mixing is generally carried out in the mixer.

2023

04-14

Make greater contributions to the development of rubber and plastic machinery industry in the world with better services

CONTACT

Tel/Fax: +86-411-89721338
Mobile/Wechat: +86-18841189355
E-mail: davidhou@dljex.com, rubbermixing@126.com
Add: Yitun Industrial Park, Xuling Town of Zhuanghe City, Dalian, Liaoning Province, China

辽公网安备 21028302000109号

Powerby：300.cn dalian | SEO | Business license